Home   /   Mag 1 Products   /   Synthetic Motor Oils   /   10W-30 Synthetic Blend Motor Oil

Synthetic Blend Motor Oils

10W-30 Synthetic Blend Motor Oil
Exceeds U.S. and import car and light truck warranty requirements for all automotive gasoline engines currently in use where a SAE 10W-30 that meets API SN, SM or SL and ILSAC GF-5 is specified

10W-30 Synthetic Blend Motor Oil

MAG 1 Synthetic Blend Motor Oil is formulated with FMX which offer superior oxidation stability, extra protection against heavy load contitions, additional high temperature protection, and better cold weather properties than conventional motor oils. Formulated to exceed ILSAC GF-5 performance requirements. MAG 1 10W-30 Synthetic Blend Motor Oil is engineered to retain high temperature film thickness that reduces engine wear.

Benefits of MAG 1 10W-30 Synthetic Blend Motor Oil include:

  • Advanced synthetic blend offers better anti-oxidancy, sludge control and TBN retention
  • Adds an extra level of protection for high mileage vehicles
  • Fortified to reduce seal gasket leaks to decrease oil consumption
  • Formulated with a new ZDDP additive for extended wear performance

 

For product numbers and detailed packaging information, please click on the pack size listed on the right hand side of the page.

Inspection Data Typical Physical Properties of
MAG 1 10W-30 Synthetic Blend Motor Oil
Specific Gravity @ 60°F (15.6°C) ASTM D4052 0.8707
Viscosity @ 40°C cSt ASTM D445 67.57
Viscosity @ 100°C cSt ASTM D445 10.2
Viscosity Index ASTM D2270 136
Pour Point °C (°F) ASTM D5950 -42°C (-44°F)
Color ASTM D 1500 2.5
Cold Cranking Simulator at (°C), cP ASTM D5293 6155 (-25)
High Temperature / High Shear Vis at 100°C, cP ASTM D 6616 7.41
High Temperature / High Shear Vis at 150°C, cP ASTM D4683 3.11
Noack Volatility, % loss ASTM D 5800 12
Calcium, wt. % ASTM D 5185 0.214
Zinc, wt. % ASTM D 5185 0.085
Phosphorus, wt. % ASTM D 5185 0.077
Sulfur, wt. % ASTM D 4951 0.331
Boron, wt. % ASTM D 5185 0.023
Molybdenum, wt. % ASTM D 5185 0.0079
Sulfated Ash, wt. % ASTM D 874 0.92
Nitrogen, wt. % ASTM D 4629 0.102
Pumping Viscosity at (°C), cP ASTM D4684 24,527 (-30)
Shear Stability ASTM D 6278 9.21
Foam Seq. I (Tendency/Stability), mL ASTM D 892 (Opt. A) 0/0
Foam Seq. II (Tendency/Stability), mL ASTM D 892 (Opt. A) 0/0
Foam Seq. III (Tendency/Stability), mL ASTM D 892 (Opt. A) 0/0
High Temperature Foaming, static foam ASTM D 6082 (Opt A) 20/0
Gravity, °API ASTM D287 31.01
TBN, mgKOH/g ASTM D 2896 7.9

PDF icon Print Spec Sheet

Print Footer