Full Synthetic Motor Oils

5W-30 Full Synthetic Motor Oil
Exceeds U.S. and import car and light truck warranty requirements for all automotive gasoline engines currently in use where a SAE 5W-30 that meets API SN, SM or SL and ILSAC GF-5 or GF-4 specifications

5W-30 Full Synthetic Motor Oil

MAG 1 FMX Full Synthetic Motor Oils are state of the art, advanced technology, synthetic motor oils which provide the higest level of engine protection available, even under the most severe operating conditions. The 100% synthetic base oils in MAG 1 provide exceptional resistance to high temperature oxidation thickening. Our sophisticated additives prevent sludge formation commonly caused by moisture and combustion by-products. Exceptionally high viscosity indices minimize cold weather oil thickening, which greatly reduces battery drain and engine wear, even at subzero start ups.


Benefits Of MAG 1 5W-30 Full Synthetic Motor Oil include:

  • MAG 1 FMX is formulated with High Phosphate Retention ZDDP for extended wear performance. Even inthe most severe industry tests MAG 1 FMX exceeds the performance limits by 65%
  • MAG 1 FMX keeps pistons cleaner minimizing oil consumption and maintaining power and compression performance
  • Maximizes Fuel Economy
  • MAG 1 FMX reduces engine sludge to near zero
  • Suitable for use where GM 4718M Corvette spec was previously recommended



For product numbers and detailed packaging information, please click on the pack size listed on the right hand side of the page.

Inspection Data Typical Physical Properties of
MAG 1 5W-30 Full Synthetic Motor Oil
Specific Gravity @ 60°F (15.6°C) ASTM D4052 0.8542
Viscosity @ 40°C cSt ASTM D445 63.95
Viscosity @ 100°C cSt ASTM D445 10.93
Viscosity Index ASTM D2270 163
Pour Point °C (°F) ASTM D5950 -45°C (-49°F)
Color ASTM D1500 3
Cold Cranking Simulator at (°C), cP ASTM D5293 5100 (-30)
High Temperature / High Shear Vis at 100°C, cP ASTM D6616 7.15
High Temperature / High Shear Vis at 150°C, cP ASTM D5481 3.2
Noack Volatility, % loss ASTM D6375 10.7
Calcium, wt. % ASTM D5185 0.214
Zinc, wt. % ASTM D5185 0.085
Phosphorus, wt. % ASTM D5185 0.079
Sulfur, wt. % ASTM D4951 0.252
Boron, wt. % ASTM D5185 0.023
Molybdenum, wt. % ASTM D5185 0.0079
Sulfated Ash, wt. % ASTM D874 0.92
Nitrogen, wt. % ASTM D4629 0.102
Pumping Viscosity at (°C), cP ASTM D4684 18,400 (-35)
Foam Seq. I (Tendency/Stability), mL ASTM D892 (Opt. A) 0/0
Foam Seq. II (Tendency/Stability), mL ASTM D892 (Opt. A) 0/0
Foam Seq. III (Tendency/Stability), mL ASTM D892 (Opt. A) 0/0
High Temperature Foaming, static foam ASTM D6082 (Opt A) 0/0
Gravity, °API ASTM D287 34.15
Shear Stability, Final Viscosity in cSt ASTM D6278 9.43
TBN, mgKOH/g ASTM D2896 7.9

PDF icon Print Spec Sheet

Print Footer